Technical Clutch stuck in neutral

Currently reading:
Technical Clutch stuck in neutral

Damummy

Member
Joined
Apr 14, 2023
Messages
11
Points
55
Location
Uk
My grande Punto was stuck in neutral and wouldn’t change gear
On taking out the clutch actuator I discovered a split in one of the rubber seals
Could this cause the pressure to drop and therefore unable to change gear?
I have attached a picture of the rubber seal and would be grateful for any help
 

Attachments

  • ACB32805-2A93-41BE-B595-54516DE771D7.jpeg
    ACB32805-2A93-41BE-B595-54516DE771D7.jpeg
    1.6 MB · Views: 69
  • 0B0912FA-12E6-4764-AD69-4E1EB14E94D0.jpeg
    0B0912FA-12E6-4764-AD69-4E1EB14E94D0.jpeg
    1.8 MB · Views: 39
  • 64410156-2315-4D1D-9E17-DD903FECB3E3.jpeg
    64410156-2315-4D1D-9E17-DD903FECB3E3.jpeg
    1.4 MB · Views: 43
  • DFEB81A4-36CF-4A22-A780-67DBB5CC8477.jpeg
    DFEB81A4-36CF-4A22-A780-67DBB5CC8477.jpeg
    1.6 MB · Views: 37
Hi all
I’m new to this forum so I’m not sure if I have missed something or maybe a bit impatient???
I posted about my fiat grande Punto semiautomatic being stuck in neutral and that I found a split in one of the seals when I took the actuator out
Could this be the cause of the problem?

Any suggestions will be greatly appreciated

Many thanks
 
Back
Top