slow rider
New member
- Joined
- Nov 13, 2015
- Messages
- 25
- Points
- 15
So the weather is finally nicer today so I tried to get this job done.
I've managed to took apart most of the panels - however I could not remove the glove box and could not locate the motors.
I've removed the screws from the right and left - both the small ones and the large once under the door + on the sides and the one hiding inside that hole on the right. I still can't pull it out and I am not sure what is holding the box in.
Otherwise other panels were removed.
At this point I've took a good look at both right & left sides and I can't see any motors.
This is the view from the right (passenger) side, towards the center. Took from under the glove box I can't remove. You can see the band that limits the glove box door + Denso logo on the plastic housing in the middle where I thought I would see motors.
And this is the view from the left (driver) side... can't see any motors either?
Please help my car is in pieces right now.
I've managed to took apart most of the panels - however I could not remove the glove box and could not locate the motors.
I've removed the screws from the right and left - both the small ones and the large once under the door + on the sides and the one hiding inside that hole on the right. I still can't pull it out and I am not sure what is holding the box in.
Otherwise other panels were removed.
At this point I've took a good look at both right & left sides and I can't see any motors.
This is the view from the right (passenger) side, towards the center. Took from under the glove box I can't remove. You can see the band that limits the glove box door + Denso logo on the plastic housing in the middle where I thought I would see motors.
And this is the view from the left (driver) side... can't see any motors either?
Please help my car is in pieces right now.