Hackair
New member
So, some of you may have seen my post about importing my Barchetta from Japan to Canada. It arrived in July and I am pleasantly surprised how good of shape it's in.
But I do have issues to deal with so it will pass a safety inspection here in Canada. Two major items being the dreaded airbag warning light. I am checking all the wire connections currently. The second is all the CV joints were worn, dry and boots mostly gone. Two new drive shafts ordered from Amazon in Germany.
The item that I'm hoping to get advice on is my key issue. I asked the dealler in Japan if there was a Red/Brown key with the car and they said no, so I knew I was going to have to deal with that.
I've found several sets of keys, locks, gas lid, and ECUs at Barchettaparts.com and Henk has been helpful. I just want to make sure I get the correct set.
My car is Nov. 2004 with dual airbags, ABS, AC and electronic throttle.
http://www.barchettaparts.com/catalog/index.php?route=product/product&path=22&product_id=1265
Will this set work?
Cheers
But I do have issues to deal with so it will pass a safety inspection here in Canada. Two major items being the dreaded airbag warning light. I am checking all the wire connections currently. The second is all the CV joints were worn, dry and boots mostly gone. Two new drive shafts ordered from Amazon in Germany.
The item that I'm hoping to get advice on is my key issue. I asked the dealler in Japan if there was a Red/Brown key with the car and they said no, so I knew I was going to have to deal with that.
I've found several sets of keys, locks, gas lid, and ECUs at Barchettaparts.com and Henk has been helpful. I just want to make sure I get the correct set.
My car is Nov. 2004 with dual airbags, ABS, AC and electronic throttle.
http://www.barchettaparts.com/catalog/index.php?route=product/product&path=22&product_id=1265
Will this set work?
Cheers