KeenanTheySay
New member
- Joined
- Aug 23, 2016
- Messages
- 5
- Points
- 1
Hi all
I recently purchased a 2001 Fiat Palio with an aftermarket sanyo headunit installed, when I took a look behind the headunit, I found that the previous owner had connected the oem wiring straight to the new sanyo wiring harness without an adapter harness. The original harness blocks are still there in the dash attached to one or two wires however are not in use. So my question is does anyone know the actual meanings (uses) of each original wire as I would like to either reconnect to original harness or to do a straight connection to my new sony headunit. If you could give me a description of each wire meaning e.g Ground=Black or +LeftFront=.... ect. Then it would be greatly appreciated. Thanks in advance
I recently purchased a 2001 Fiat Palio with an aftermarket sanyo headunit installed, when I took a look behind the headunit, I found that the previous owner had connected the oem wiring straight to the new sanyo wiring harness without an adapter harness. The original harness blocks are still there in the dash attached to one or two wires however are not in use. So my question is does anyone know the actual meanings (uses) of each original wire as I would like to either reconnect to original harness or to do a straight connection to my new sony headunit. If you could give me a description of each wire meaning e.g Ground=Black or +LeftFront=.... ect. Then it would be greatly appreciated. Thanks in advance