Your callipers are not the same as mine so the parts that may be needed will be different. The pins on my callipers are 50mm long. They were 2.8mm diameter in a 3.5mm hole so I fitted 3.2 x 50 pins (i.e. 1/8" pins). The shims are just very thin steel washers bought from Ebay; mine are 12mm to suit the screws and I bought a selection of thicknesses, 0.1mm and 0.25mm if I remember correctly. Your callipers are different so may need different pins and shims or none at all, sorry I can't be more help.