Hi There
I recently had encountered a few probs with a 2008 punto.
to cut a long story short i have had two inlet valves changed and the head skimmed etc
Now, i have put everything back together as it was.
The crank has been set with the flywheel marking (set to 0 degrees on gearbox housing)
The cam has been set with the markings on pulley and casing.
Now the car turns perfectly, but no sign of life. There is defo spark at every lead, and fuel is coming through. It doesnt even spluter.
Is there anyway the guys who rebuild the head may have altered the cam pulley position?is there any way to view/check by removing rocker?
any help is appreciated.
thanks
I recently had encountered a few probs with a 2008 punto.
to cut a long story short i have had two inlet valves changed and the head skimmed etc
Now, i have put everything back together as it was.
The crank has been set with the flywheel marking (set to 0 degrees on gearbox housing)
The cam has been set with the markings on pulley and casing.
Now the car turns perfectly, but no sign of life. There is defo spark at every lead, and fuel is coming through. It doesnt even spluter.
Is there anyway the guys who rebuild the head may have altered the cam pulley position?is there any way to view/check by removing rocker?
any help is appreciated.
thanks