johnboy111
Member
Hi, just wondering if anyone can point me in the right direction. I have 2011 fiat doblo 1.3 that will not start after changing the injector seals.
The van turns over but will not start.
Initially I thought it had air in the system so bled the system. This didn't work.
I changed the battery this didn't work either.
I plugged in a foxwell diagnostics tool and got the following codes -
u0001 can line error intermittent
u0422 inertia function, intermittent (this one keeps coming up after resetting it)
I've changed the air bag control module and done the fps system reset using the indicators neither of these worked.
The van was running fine before barring the seal blowing. It'll start on easy start.
There is fuel coming to the filter, rail, hp pump etc
Its definitely some kind of electrical fault.
I've checked all the fuse's they're ok, checked all the connectors and sensors and wires these are also ok.
Its driving me insane, what was meant to be a couple of hrs has now turned into 3 days.
If anyone can help that would be much appreciated. Thanks, John
The van turns over but will not start.
Initially I thought it had air in the system so bled the system. This didn't work.
I changed the battery this didn't work either.
I plugged in a foxwell diagnostics tool and got the following codes -
u0001 can line error intermittent
u0422 inertia function, intermittent (this one keeps coming up after resetting it)
I've changed the air bag control module and done the fps system reset using the indicators neither of these worked.
The van was running fine before barring the seal blowing. It'll start on easy start.
There is fuel coming to the filter, rail, hp pump etc
Its definitely some kind of electrical fault.
I've checked all the fuse's they're ok, checked all the connectors and sensors and wires these are also ok.
Its driving me insane, what was meant to be a couple of hrs has now turned into 3 days.
If anyone can help that would be much appreciated. Thanks, John