ONCE AGAIN, a lot of initial info missing ! HOW would you like US to help if we don't even know such detail as "oops, forgot to say ECU was replaced..." (or similar)
That being said (barked), I believe you issues would be (at least partialy) fixed by performing a PROXY Alignment on your Body computer. Need FES or
MES to do that !
Regards, Bernie
If someone here helped You fix or understand your issue, hit the thanks icon @ bottom right, it's free and make us happy...
Quite right my apologies...
The car was due for collection so asked in advance of any obvious issues to instrument cluster failure.
My Last post was more in depth of the faults 'as is' now.
So they are as follows AND result via registered
MES
ABS light on. - NO connection to ecu
Airbag light on passenger and main - no connection you ecu
Power steering in operable- unable to connect to ecu.
I've tried a proxy alignment and it connects to the ecu writes to the can but fails to execute. But has stopped the mileometer flashing. Upon install
Can setup says NGE is unavailable
Reciever radio is unavailable ( aftermarket fitted)
NAB unavailable
What I have replaced from factory and why
I bought the car online with a supposed instrument fault and drain on battery.
I immediately thought it would be an ecu problem and or alternator. Sourced a donor car.
Get to pick up fixer and owner tells me he has now lost the key... no issue I thought as already was going to do full lock set change anyway .
I've swapped out
the whole steering column. As steering wheel was in bad shape.. although I have noticed the original was a 7 wire purple cable from sensor to loom. BUT it's original to the donor ECU. Hence why swapping it over.
Instrument cluster
Immobiliser ecu
IGNITION lock not done doors yet but it's not relevant at this point.
Main ECU
I've visually inspected the earth above the ECU. But will take it off and clean later.
Visually inspected and tugged battery to chassis earth. Again will undoubtedly and inspect better.
So I am a little confused as to why I can't connect to ABS AIRBAG and POWER STEERING.
I can however connect and erase and actuate engine, components