Technical stilo abarth selespeed problem.

Currently reading:
Technical stilo abarth selespeed problem.

Joined
Apr 7, 2014
Messages
8
Points
4
Hello everybody.

i have search all the internet, but didnt really find a solution.

My problem is that my gearbox is acting up.
When i start the car and drives in 1st and in R the whole car is very jumpy.
I can here there is a lot of electric noise from gearbox( more than normal).

When i turn the car off for about 5 - 10 sec theres still a lot of elec. noise from gearbox.

I have used ECU scan but it dont find any errors, but it wont allow me to do a re-calibration.

I think the problem is with the hydralics because the sound come from the pump i think. the pressure is above 40 Bar at all time so that should be fine ?

I have opserved a lot of small air bubbles in the oil tank for the hydralics.

I hope someone can help !
 
Use the bleed routine in the MES software. You may not need to do the recalibration.

If you are getting the hydraulic pressure spiking outside normal limits (45-55 bar) then it could be the accumulator that has failed. (easy fix)
 
Back
Top