Save up to 15% with Adrian Flux insurance!

Technical Fiat Stilo Abarth Indicator Fault

Currently reading:
Technical Fiat Stilo Abarth Indicator Fault

T

trserkan06

New member
Joined
Apr 3, 2011
Messages
46
Points
9
Hi all members,

My car is Fiat Stilo 1.6 16V Dynamic

(Curize, digital AC, ASR, rain, light and park sensor)

My cars's indicator, ABARTH 2.4 stilo''s indicator.

I did the proxy alig. with MultiECUScan but first boot error to MAX COOLANT!

Why? :bang: :bang: :bang:


Please check it fault video:

​
 
Last edited:
you can solve this problem by fitting a 2 sec. delay circuit in between the switched +12v wire of the instrument cluster - i had the same problem with my 1.6 with Abarth cluster and this trick solved the high coolant problem which really is a software/firmware fault of the cluster itself.
 
yellowstilo said:
you can solve this problem by fitting a 2 sec. delay circuit in between the switched +12v wire of the instrument cluster - i had the same problem with my 1.6 with Abarth cluster and this trick solved the high coolant problem which really is a software/firmware fault of the cluster itself.
Click to expand...

Short circuit or open circuit for 2 sec. delay? Where is it? Temperature sensor?
 
just cut the switched +12v power wire, connect the delay circuit (+ 12v in, 2 seconds delayed +12v power out and ground)
the wire is at the back of the instrument cluster, it has nothing to do with the temperature sensor.
 
yellowstilo said:
just cut the switched +12v power wire, connect the delay circuit (+ 12v in, 2 seconds delayed +12v power out and ground)
the wire is at the back of the instrument cluster, it has nothing to do with the temperature sensor.
Click to expand...

I'm understand thanks.

I tryed. But not work with 2 sec. Work it with 1 sec. Only 1 sec.

Now i need circuit.
 
i think there was a delay circuit example in the Connect Nav thread, you just might have to change the capacitor value (smaller) to adjust the delay time according to your needs.
 
yellowstilo said:
i think there was a delay circuit example in the Connect Nav thread, you just might have to change the capacitor value (smaller) to adjust the delay time according to your needs.
Click to expand...

Problem was solved. Very thanks my friend.


 
Last edited:
You must log in or register to reply here.

Similar threads

Jalope
Technical Fiat Stilo
Replies
0
Views
284
Jalope
Jalope
Zeewulf
General Fiat Stilo Sill Repalcements
Replies
1
Views
326
Ralf S.
Ralf S.
M
General Fiat Stilo Abarth 5M17 Restoration ( Nuts & Bolts )
Replies
2
Views
390
Moreno83
M
D
  • Question
Technical Fiat stilo/Bravo seat airbag wiring
Replies
7
Views
340
Dazzy
D
Dionisis13
General Key code for Fiat Stilo Visteon radio
Replies
1
Views
74
ben
ben
Back
Top