Needed tools
1. Screwdriver (+)
2. Soldering iron
3. Solder with a resin core (gives a bit more flex)
4. Cutter
5. Cable stripper
6. Piece of cloth
7. A set of EVO rear lights
8. EVO rear light plugs with about 7cm's of cable.
9. Heatshrink
10. Lighter
11. Resistors (2 x 25watt 8Ohm resistors with heatsinks in a series)
2. Soldering iron
3. Solder with a resin core (gives a bit more flex)
4. Cutter
5. Cable stripper
6. Piece of cloth
7. A set of EVO rear lights
8. EVO rear light plugs with about 7cm's of cable.
9. Heatshrink
10. Lighter
11. Resistors (2 x 25watt 8Ohm resistors with heatsinks in a series)
- Next page: Removing the old rear lights
- Previous page: Overview
