Technical FIRE 1108cc - ALTERNATOR - Best way to remove???

Currently reading:
Technical FIRE 1108cc - ALTERNATOR - Best way to remove???

phatboy130

New member
Joined
Apr 9, 2005
Messages
38
Points
18
Location
Exeter (ish) Devon
Hello chaps :)

Whats the best / easiest way to remove the alternator from a Fire 1108 UNO??

Would it be by taking the wheel off, removing the wheelarch liner and getting to it thru the wing, or by getting underneath the car when it's up on some ramps???

Any advice would be appreciated, can't seem to find a thread discussing this, but sorry if there is one I have overlooked ;)

Cheers,

Jay.
 
I change mine by dropping it from underneath the car. You don't need to remove the wheel arch liner either. Unbolt the alternator, and it will just drop down on the drivers side drive shaft. You should then be able to pull the wheel arch liner (it's quite flexible) enough so that there is enough space to get the alternator out.

Refitting is just the same, pull the wheel arch liner enough until you can get the alternator through it, then bolt up as per normal (y)
 
Back
Top