S
Steve
Guest
Hi i have a brava sx 1.2 (2001)
im trying to take the wishbone off to replace it but first off none of my sockets/spanners fit the 4 big bolts holding the back end of the wishbone on.
Ive measured them the best i can an they seem to be 15mm can someone confirm this for me before i go buy a set and is it easiest to use a socket or a spanner to get them off because they seems well rusted in place ive sprayed them with wd40 so when i get a set they should be ok.
Are there any tips for me though if the 4 nuts are stuck on solid because i have already snapped a bolt trying to take the drop link bolt off and i dont want to do that again
cheers
steve
im trying to take the wishbone off to replace it but first off none of my sockets/spanners fit the 4 big bolts holding the back end of the wishbone on.
Ive measured them the best i can an they seem to be 15mm can someone confirm this for me before i go buy a set and is it easiest to use a socket or a spanner to get them off because they seems well rusted in place ive sprayed them with wd40 so when i get a set they should be ok.
Are there any tips for me though if the 4 nuts are stuck on solid because i have already snapped a bolt trying to take the drop link bolt off and i dont want to do that again
cheers
steve