Ok then problem.
MPI Sei cutting out at lights etc,
When dipping the clutch and coming to a stop the revs drop right off it stalls.
Full service done
No EML, no fault codes
New plugs and leads
New crank sensor
New temperature sensor
New MAP sensor ( Ebay jobby )
Throttle body cleaned.
2 bottles of injector cleaner through.
New lamda sensor purchased, but not fitted ( need socket )
Starts ok cold or warm
Ticks over from cold fine and revs settle at 900rpm
Pulls ok with no hesitation.
Oil and water at normal levels.
MPI Sei cutting out at lights etc,
When dipping the clutch and coming to a stop the revs drop right off it stalls.
Full service done
No EML, no fault codes
New plugs and leads
New crank sensor
New temperature sensor
New MAP sensor ( Ebay jobby )
Throttle body cleaned.
2 bottles of injector cleaner through.
New lamda sensor purchased, but not fitted ( need socket )
Starts ok cold or warm
Ticks over from cold fine and revs settle at 900rpm
Pulls ok with no hesitation.
Oil and water at normal levels.