PandaEleganza
New member
- Joined
- Jun 17, 2014
- Messages
- 106
- Points
- 25
When I wash my Panda I'm pretty thorough about cleaning inside the wheelarches, but have noticed in recent months that there is a quantity of mud and grot getting stuck in the rear arches. I do my best to blast and brush this away, but I know I'm not getting it all. The main area seems to be the 'lip' just on the inside of the arch itself. There's also quite a deep area inside the arch reaching up towards the windows.
As the Panda is galvanised I assume that I don't need to worry too much about getting this area spotless, but I wondered whether anyone has any good tips for cleaning these arches, and perhaps whether (if I can get them properly clean) I should apply a bit of waxoyl (or similar - I favour the Bilt Hamber products).
As the Panda is galvanised I assume that I don't need to worry too much about getting this area spotless, but I wondered whether anyone has any good tips for cleaning these arches, and perhaps whether (if I can get them properly clean) I should apply a bit of waxoyl (or similar - I favour the Bilt Hamber products).