Reversing lights seem poor..
Only got one on the left.. Nothing on the Right..
Is this correct?
Too dark to mess around tonight
Only got one on the left.. Nothing on the Right..
Is this correct?
Too dark to mess around tonight
Been standard fare for years…get a LHD one to replace the fog light and wire in, then mount some ‘inset’ fog lights toReversing lights seem poor..
Only got one on the left.. Nothing on the Right..
Is this correct?
Too dark to mess around tonight
Thanks for that link I have just ordered one from Amazon UK (a bit cheaper here too). Reversing into the drive at my house gets a bit trickier in the winter, due to the complete lack of streetlighting and the underwhelming performance of the reversing light.Reversing light is in the lower part of the bumper. (fog light is on the other side).
Clear lenses is the main cluster are the indicators.
Some owners put the facelift style lights on a pre-facelift car and mounted reversing lights (LED's) in the cluster, next to the indicator light.
But that would require a lot of DIY'ing. I'm sure I've seen instructions on the US Fiat 500 forum but I can't find it anymore.
I've replaced my reversing light with a LED light and it made a massive difference.
https://www.amazon.nl/gp/product/B0911X7XM6/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&th=1
Add automatic lighting to the drive? Got to be better than any reversing light?Reversing into the drive at my house gets a bit trickier in the winter, due to the complete lack of streetlighting and the underwhelming performance of the reversing light.
Already have one, but by the time I’ve got out of my car, unlocked the gates and have got back in the car the light goes out and then takes another 30 seconds to kick back in.Add automatic lighting to the drive? Got to be better than any reversing light?
It might be possible to adjust the delay timing.Already have one, but by the time I’ve got out of my car, unlocked the gates and have got back in the car the light goes out and then takes another 30 seconds to kick back in.
One of my earliest mods;
View attachment 434946
As long as you can fit it flush in the curving bumper. Mine inevitably points down a bit but the spread of light makes up for that. It was a long time ago (2015) and I don't recall details but it's US made and has a die-cast body. It was certainly a lot more expensive than your option!I really like this arrangement, but can't find that fitting in white....
So settled for these in the end....
2X 5inch Flush Mount LED Work Light Bar Spot Combo Reverse Lamps 4-Row Off Road
I figure I can 3D print a new front in white, and the other one is for spare.