Hi All, new here looking for help and getting deparate.
1.4 12v Bravo 1996. Drizzle bar dried up and rounded all 4 cam lobes on the exhaust valves by about 5mm or more. Have changed for a new camshaft (new secondhand) and now the little darling won't start. I have followed tdc by the flywheel and also a screwdriver down the 1st spark plug hole. I have set the cam according to haynes with cam on pot one just above horizontal and on pot 4 exhaust just off and inlet just on. Oringinally belching fire out of carb every fourth or fifth rotation, now nothing, theres fuel, and spark but it justy sounds like a big starter moter with a light chugging sound coming from the exhaust. i am trying the ECU reset, again. Any other thoughts.
I did do a compression text and 1 and 3 came up nothing 2 at 150 4 at 50 but I wasn;t sure if this was due to miss timing?
Many thanks
Dave
1.4 12v Bravo 1996. Drizzle bar dried up and rounded all 4 cam lobes on the exhaust valves by about 5mm or more. Have changed for a new camshaft (new secondhand) and now the little darling won't start. I have followed tdc by the flywheel and also a screwdriver down the 1st spark plug hole. I have set the cam according to haynes with cam on pot one just above horizontal and on pot 4 exhaust just off and inlet just on. Oringinally belching fire out of carb every fourth or fifth rotation, now nothing, theres fuel, and spark but it justy sounds like a big starter moter with a light chugging sound coming from the exhaust. i am trying the ECU reset, again. Any other thoughts.
I did do a compression text and 1 and 3 came up nothing 2 at 150 4 at 50 but I wasn;t sure if this was due to miss timing?
Many thanks
Dave