I was going round a roundabout this evening and if I turn sharp enough I can hear a grinding sound.
Anyone enlighten me please ?
Anyone enlighten me please ?
Technical Grinding sound when turning sharply
- Thread starter DJSparky
- Start date
Currently reading:
Technical Grinding sound when turning sharply
brake disc heat shield...
they pi** me off
they pi** me off
OP
OP
What, Its rubbing against something ? Any way to cure this or a big problem ? : (
OP
OP
Nope everythings standard on original tyres. But I have changed them today so I will see if it makes a difference. Aslong as it isnt going to fall apart in 3 months!
- Joined
- Apr 26, 2007
- Messages
- 13,617
- Points
- 2,161
Mine hasnt in 4 years & 70,000 miles....
mines stiill does it .i kinda like it it lets me know iam over cooking my corner speed....
OP
OP
Mine broke after 6 miles of owning it : P
have same problem, ive bent my disc heat shields back or whatever there called and still happens.....
at least i know its not just me then! I always thought it was the heat shield on the brake disc, dosent bother me as dont really throw it around that much so dosent come apparent.
- Joined
- Oct 27, 2010
- Messages
- 65
- Points
- 15
got this noise now after having my brake pads, bottom arm and drop link changed. Noise is from n/s/f when turning right. The wheel loads up and I get a metalic sounding scraping noise. Only apparrent when going round roundabouts or tight righthanders on full lock. Will check the heatshield over the disc at the weekend.
Had the exact same thing on mine turning in both directions anyway long story short when changing my discs I bent the heat shields back on all wheels and have not heard a peep since, good luck with yours;-)
Last edited:
