CallumColes
New member
- Joined
- Feb 13, 2017
- Messages
- 19
- Points
- 3
Hi all,
Iv just bought a 56 plate grande punto with a dualogic/selespeed issue i cannot select any gear its just stuck in neutral i can hear the pump slightly and the pressure holds at about 40/47 bar if i keep the car running and disconnect pressure sensor the pump cuts in ect.
Im getting a fault code P060C - Control unit faulty (Microprocessor).
iv pulled my ecu off which is a magnet marelli - 55209034, i cant seem to find one with matching part number to try to see if it is actually the ecu
any help welcome.
Iv just bought a 56 plate grande punto with a dualogic/selespeed issue i cannot select any gear its just stuck in neutral i can hear the pump slightly and the pressure holds at about 40/47 bar if i keep the car running and disconnect pressure sensor the pump cuts in ect.
Im getting a fault code P060C - Control unit faulty (Microprocessor).
iv pulled my ecu off which is a magnet marelli - 55209034, i cant seem to find one with matching part number to try to see if it is actually the ecu
any help welcome.