dubsential
New member
- Joined
- May 31, 2016
- Messages
- 91
- Points
- 33
A completely seized gearbox filler any ideas from fellow fiat people on how to get it undone..
Or another filling method it is on a punto mk2 jtd has zero oil in but I don't really know if a blow torch would heat it enough to crack it and certainly don't want to crack gearbox in the process, which has just been replaced after third and fourth went walkies..
Ive tried breaker bar even a jack on a breaker for a few days..
It's had plenty of penetrating oil.
I believe a reaction between alloy and steel takes place creating said really annoying problem.
If anyone has some idea or the solution please help..
Forum has been v good so far some day I will be guiding others as car is practically rebuilt.
But this little sod is spoiling the day now.
Or another filling method it is on a punto mk2 jtd has zero oil in but I don't really know if a blow torch would heat it enough to crack it and certainly don't want to crack gearbox in the process, which has just been replaced after third and fourth went walkies..
Ive tried breaker bar even a jack on a breaker for a few days..
It's had plenty of penetrating oil.
I believe a reaction between alloy and steel takes place creating said really annoying problem.
If anyone has some idea or the solution please help..
Forum has been v good so far some day I will be guiding others as car is practically rebuilt.
But this little sod is spoiling the day now.