fiatdriver19
New member
- Joined
- Sep 7, 2017
- Messages
- 11
- Points
- 3
Hello everyone
First of all i have to say that i am really grateful for this forum and the helpful people in here. Now that being said, i come again with another issue regarding the coolant temperature sensor on my fiat punto Mk2 1.2. After locating the green sensor on the right side of the engine i noticed that i can not unscrew the green sensor since some plastic teeth are in the way. see picture below. So should i buy the whole plastic enclosure with the sensor or just the green sensor and break those plastic teeth to unscrew it? Sorry if i'm not too technical here but ikd what to call those. Thanks in advance.
First of all i have to say that i am really grateful for this forum and the helpful people in here. Now that being said, i come again with another issue regarding the coolant temperature sensor on my fiat punto Mk2 1.2. After locating the green sensor on the right side of the engine i noticed that i can not unscrew the green sensor since some plastic teeth are in the way. see picture below. So should i buy the whole plastic enclosure with the sensor or just the green sensor and break those plastic teeth to unscrew it? Sorry if i'm not too technical here but ikd what to call those. Thanks in advance.