- Joined
- Jun 12, 2009
- Messages
- 716
- Points
- 164
Idler on aux belt on my 115jtd sits off the belt slightly...(belt came off the other day)
Im hoping this was the cause as ive a new idler ordered with everything else...however there appears to be no adjustment in or out understandably on the idler pulley...about 5mm of it sits to the left of the belt as you look in at engine bay...leaving a good portion of the belt with no tensioner on it to the right.
Surely this isnt right...but there is only the idler and a washer behind it...the washer is about 5mm thick, im wondering if this is the wrong washer??
Can someone have a look under their 115JTD bonnet and confirm the idler meets the belt properly...tensioner looks OK but i wont know for sure till i put the new belt on.
Cheers
Marty
Im hoping this was the cause as ive a new idler ordered with everything else...however there appears to be no adjustment in or out understandably on the idler pulley...about 5mm of it sits to the left of the belt as you look in at engine bay...leaving a good portion of the belt with no tensioner on it to the right.
Surely this isnt right...but there is only the idler and a washer behind it...the washer is about 5mm thick, im wondering if this is the wrong washer??
Can someone have a look under their 115JTD bonnet and confirm the idler meets the belt properly...tensioner looks OK but i wont know for sure till i put the new belt on.
Cheers
Marty