- Joined
- Aug 3, 2012
- Messages
- 219
- Points
- 43
Its amazing they are still intact unless they were replaced due to the ding, that was a fair ding to bend the cross member
Its great they are intact alright. I have a pair removed from a brava which I noted were bolted on.. much handier to change! decided as they were reasonably solid just to wire brush them and treat with rust primer. In relation to the front crossmember after a while I thought that the bend was making such a perfect v that it must be factory but then I realised after thinking back to a scrap tipo I have that no it definitely should be straight!