Hi everyone, hope you can help, had the airbag light intermittent on for while, so used the fiat multiecuscan software to get the following code
Error Code B100F Passenger airbag resistance too high to sensor
Tried to clear the error code without any success using a modified ELM327. The ELM327 did connect with the airbag module and successfully connected with all the other modules. I tried using a red airbag connector lead but would not connect at all.
Any advice? is it a DIY fix or should I get an auto electrician to have a look?
Thanks alot.
Error Code B100F Passenger airbag resistance too high to sensor
Tried to clear the error code without any success using a modified ELM327. The ELM327 did connect with the airbag module and successfully connected with all the other modules. I tried using a red airbag connector lead but would not connect at all.
Any advice? is it a DIY fix or should I get an auto electrician to have a look?
Thanks alot.