Hi all.
Iv got a a 2008 1.4 petrol bravo engine code 192B2000.
I put a replacement engine in and now it has no spark.
It has all the same electrics, all I did was swap the block basically.
When I put the key in the ignition the immobilizre icon goes off.
I put it on a diagnostic "Delphi 2015 r3" and a cheap hand held odb2 unit they did not bring any codes up.
I unplugged the crank sensor and cam sensor run the diagnostics again still didn't bring up any codes up.
There is no damage or any twist or kinks on the wiring loom.
I have downloaded the e learn not any help.
Any help would be greatly appreciated.
Thanks in advance moss
Iv got a a 2008 1.4 petrol bravo engine code 192B2000.
I put a replacement engine in and now it has no spark.
It has all the same electrics, all I did was swap the block basically.
When I put the key in the ignition the immobilizre icon goes off.
I put it on a diagnostic "Delphi 2015 r3" and a cheap hand held odb2 unit they did not bring any codes up.
I unplugged the crank sensor and cam sensor run the diagnostics again still didn't bring up any codes up.
There is no damage or any twist or kinks on the wiring loom.
I have downloaded the e learn not any help.
Any help would be greatly appreciated.
Thanks in advance moss