General Stilo 1.9JTD Dynamic (adjustable clutch?)

Currently reading:
General Stilo 1.9JTD Dynamic (adjustable clutch?)

Joined
Feb 16, 2015
Messages
10
Points
3
Stilo 1.9JTD Dynamic on a 52 registration plate

Can anyone advise please?
Is the clutch on the above adjustable? I'm finding that recently I have to push the pedal to the floor to change gear. I read the other Stilo clutch threads but found no mention of the 1.9 JTD

Regards
Lisa
 
Can you advise where the clutch bleed nipple is, please?

The bleed nipple is on top of the gearbox just below the battery box.

If it's an 80BHP JTD, the nipple is on the clutch slave cylinder on top of the gearbox.

If it's a 115BHP JTD, the slave cylinder is inside the gearbox and the nipple protrudes from the top of the gearbox bell housing.

The bleed nipple for both type is not the conventional screw type. Do not attempt to unscrew the nipple or it will break off.
.
 

Attachments

  • JTD 80HP Slave Cylinder.JPG
    JTD 80HP Slave Cylinder.JPG
    27.2 KB · Views: 31
  • JTD 115BHP Bleed Nipple.JPG
    JTD 115BHP Bleed Nipple.JPG
    685.7 KB · Views: 63
The bleed nipple is on top of the gearbox just below the battery box.

If it's an 80BHP JTD, the nipple is on the clutch slave cylinder on top of the gearbox.

If it's a 115BHP JTD, the slave cylinder is inside the gearbox and the nipple protrudes from the top of the gearbox bell housing.

The bleed nipple for both type is not the conventional screw type. Do not attempt to unscrew the nipple or it will break off.
.
Thanx for the info. But, If you can't unscrew it, how do you bleed it? btw it's a 115BHP JTD
 
Last edited:
115BHP version is the photograph on the right above. To bleed it:

  1. Fill the combined clutch/brake fluid resevoir and leave the cap loose.
  2. Connect a pipe and container to the nipple to collect the old fluid.
  3. Lift the clutch pipe retaining clip as shown in the photograph then withdraw the clutch pipe about 10mm only.
  4. Fluid should bleed through the system by gravity.
Do not pump the clutch pedal, or the clutch pipe will be forced off of the internal slave cylinder connector pipe.
.
 
Back
Top