Hi Guys,

I am changing my rear discs and pads next weekend, and I am aware that life will be easier with a piston rewind tool.

Will this be suitable?

http://www.ebay.co.uk/itm/NEW-BRAKE...t=UK_Hand_Tools_Equipment&hash=item484d1f8c16

thanks!

it will depend if the kit has correct 2 pin plate for winding back piston , as it has both left and right turning that is needed for winding back pistons may be case of finding out about adapter plate when kit arrives unless someone has used that kit before..think it is offside goes right clockwise and nearside goes left anti clockwise..some use mole grips but you risk damaging rubber piston boot I used angle grinding disc tool which has 2 pin prongs on it,,if you get kit let us know how you get on as it is a reasonable price for both left and right winders
leave handbrake set up until both sides done and you have pumped brake pedal 10 nto 20 times with engine running to set caliper piston first then set up hand brake

I tried to do mine myself.... Broke the caliper 120 for a recon one. Get a garage to do it in my opinion its easier but up to you

That's the kit I used on mmy stilo, works a treat, just remember, whatever side you are on, WIND TO THE FRONT!

nikkiy9 said:

That's the kit I used on mmy stilo, works a treat, just remember, whatever side you are on, WIND TO THE FRONT!

Click to expand...

cheers Pal, ill get one ordered!