- Joined
- Apr 8, 2008
- Messages
- 16,742
- Points
- 3,186
Clear the code and see what re-occoursHi I tried with alfaobd see the results it says system disabled. so how to enable this.
c1008
Motor phases
Open circuit
Failure lamp 'ON': Requested
Fault present
Test complete or not applicable
Battery voltage: 11.73 V
Recovery type: System disabled
Effort on steering wheel: -0.14 Nm
Vehicle speed: 0.00 km/h
Calculated steering position: 0.00 °
Motor control current: 0.00 A
Byt 11.7v is too low
12v is a flat battery
12.3v is 50% charged
12.6v is charged
So 11.7 is very low...
A battery is able to provide lights at that voltage and ecus but when motor pulls current the current isnt there
And voltage drops either more and ecu pulls the white flag...
Ziggy