Hi my multpla was on five bars temp and my fan did,nt kick in does it have temp switch or something never heared it working at all. its a 2003 with aircon which also stopped working been regassed think i saw leeked stain on drive under front left area. can anyone give me some ideas, thanks in advance.

I've not had to deal with fan issues myself, but you need to see if the fan is working (as in the motor), if it works then the problem probably lies with a sensor or switch or relay. So first you need to connect the fan direct to the battery, unfortunately ive only recently got my multipla so have no idea where the connections are, but they usually come out the middle where the motor is i think. Alternatively, read this thread https://www.fiatforum.com/punto-ii/435674-fan-test.html it relates to the punto, halfway down theres a post by Brendan on 16/2 which says if you disconnect the temp sensor the fan should come on. Cant vouch for certain its the same, perhaps someone else knows, but logically it should as fail-safe incase the temp sensor fails.

thanks spud seems like logicle steps to take.

the fans often have 2 x speeds,
and you should be able to drive it via the OBD port. to test function,

there is a basic GUIDE in the mk2 punto GUIDES section on replacing the fan with a cheap new one

charlie