Changing doblo rad support panel
When i first saw my radiator support panel ,I couldn't believe how rusted it was, especially since the rest of the underneath looked so good.
So replacing it was inevitable, especially since i didn't see myself parting with my Doblo any time soon. i thought to take a few pictures and share some information about how i did the job,apolagies for the waffle,it's my first guide.
I started by removing the front grille panel(with the badge on),4 torx screws on the top panel near the bonnet catch,
remove the screws and tilt(lean forward) out the panel and the bottom 4 tabs should pull out of the bumper 4 slots.
now you can remove the top bumper torx screws that were hiding behind the grille.
So replacing it was inevitable, especially since i didn't see myself parting with my Doblo any time soon. i thought to take a few pictures and share some information about how i did the job,apolagies for the waffle,it's my first guide.
I started by removing the front grille panel(with the badge on),4 torx screws on the top panel near the bonnet catch,
remove the screws and tilt(lean forward) out the panel and the bottom 4 tabs should pull out of the bumper 4 slots.
now you can remove the top bumper torx screws that were hiding behind the grille.
