Have bought a new electric window regulator for my 2003 Ducato 2.8.
Removed the 6 nuts from old one, the bottom nut & the 3 holding the motor
relase OK but the top 2 although the nuts came off OK seems as if somethong else is holding the mechanism on.

Really could do with some guidance on how to remove, as got everything dismantled at the moment.

Many Thanks in advance guys.

You could download a Ducato workshop manual from the forum downloads section here:

https://www.fiatforum.com/downloads.php?do=cat&id=23

Thanks Davren just gone through it bit by bit, still cant see anything else
that may be holding the top part from removing the unit?

I've never done one so can't really offer you any advice.

Sorted window problem, so thought I would tell my experience for others
who may need to know quickest & easiest way.

Firstly my window was in the raised position making it more difficult.
There is a plastic connector which goes through the bottom centre of
window that needs to be removed from glass, this is near impossible when
window is up.
So I cut the two cables with a pair of cutters that are connected to top and bottom end of motor, this allows the widow to lower and make easy access
to the connector in the wider aperture in door.
Disconnect put new regulator & motor in job done

Sorry... the DTE and eLEARN manuals are no longer available from the forum downloads section.