Fiat Doblo Family - Size of boot when rear seats taken out

Hi

I have been trying to find the size of the floor in the rear of a Doblo family when all the rear seats taken out. and with just the 2 rear seats taken out. Everyone mentions the capacity but not width and length. Can some kind soul take a measure and give me a rough idea. Whooh! also can the seat mountings be taken out? Thank you

Hi,

Length: about 1850mm from inside of back door to back of seat at floor level.

Width: 1300mm (measured between rear seat belt cover/housings), 1200mm between wheel arches at floor level.

Rear seat detail see this:https://www.fiatforum.com/doblo/435025-rear-seats-fold-up-all-doblos.html

Cheers

Ron

Similar measurements on the 2010-on model

1850mm from back door to back of the seat, with the seat in the rearmost position. Add another 200mm with the seat all the way forward.

Width is 1200mm all the way

My car is wheelchair modified, but from what looks like the original floor level, the height at rear tailgate 1170mm, but rises inside the car

Can't help with the rear seat stuff as mine hasn't got a standard floor (but has 2 small fixed rear seats with wheelchair space in between them)

I can get my speedway bike in the back + all the gear,without any wheel removal. The bike goes in at an angle and fits comfortably.

topcat5 said:

I can get my speedway bike in the back + all the gear,without any wheel removal. The bike goes in at an angle and fits comfortably.

Click to expand...

My bike won't fit in a standard Dobby due to the height.
I have an Enduro/Green Lane Husqvarna, hence the wheelchair converted Dobby, so I just drop the ramp and push the bike in. Bike is 54" high - taller than a lot of bikes. Although the bike will fit with the front passenger seat in, I do remove it as that gives me more space for all my kit, and I don't need to be as fussy in positioning the bike. Plus, I don't get all sorts of mud, cow/sheep muck from the bike on the back of the seat!

Mike