Hi

1st sorry for my english cos i'm french.
I have a very similar problem like this thread on doblo forum: "280656-abs-ebd-errors-sorted"

My doblo is a 2008 1.9 jtd 105bhp.
I clean all the connectors under the bonnect and on the body computer with no succes.
I test all my earth leads, all is ok ( no corrosion and resistance of 0.2 OHMS )
I test with two battery with no succes.
My alternator seems to be ok ( 14v at idle )

The facts:

I have intermittent erros on dash for EBD (while engine is running or not) ( abs and handbrake light together ), if i increase electrical load ( full beam, turn signals, defrost, fan speed 4 ), relays starts cliking under the bonnet and on the body computer and my fuel and speedo gauge dropped to 0 and back up.

One other thing i see, when i was driving while the EBD error is on the dash, if if remove my foot from the accelerator, errors disapear from the dash under nearly 2000 rpm errors are back. In other case, if i brake or accelerated error is back.

I have Multiecuscan, but i haven't any errors on my car.

Daes someone have an idea of what going wrong with my car ?

I hope you understand me, don't hesitate to ask if unsure, thanks

Hi

My problem is solved, even if my earth lead ( battery, body, engine ) was in perfect condition, i move this cable and all my problems disapear.

Thx