Hi, just wanted to put a note up about my gear linkage cables. After my gear leaver started to stick in the cold (would not self centre left to right) it got worse and worse. After taking it to a garage i was quoted a shocking amount of money to replace the cables. Figuring i could live with it until i had time to do it my self i finally got around to looking at it today. It is not the cables! After alot of faffing i was able to separate the cable from the gearbox linkage, and the cables and remote are fine, it would appear that it is the top of gearbox mount. I sprayed alot of wd40 there and wiggled for like 10 min and it has significantly improved. My assumption is that it is corrosion on the long 2"ish pin that the lateral cable is attached to. I would love to get the mech out and clean it up, but everything on this car is so hard to access :-( maybe this will help someone.