Which Alloys do you have on your Bravo mate?
General Welcome to My Bravo Project!
- Thread starter BravoCity
- Start date
Currently reading:
General Welcome to My Bravo Project!
Which Alloys do you have on your Bravo mate?
The standard Dynamic alloys.
HID's? Yes many of us including myself. Quite an easy job. Though I'll adamantly tell you that you should not use HIDS in your fog lights, firstly the cornering function wouldn't work correctly as HID's have to warm up. Secondly and most importantly fogs use reflectors and you will scatter the bright light all over the place and dazzle other drivers. The same thing applies for people who use them as full beam lights. HIDS are ok yet technically illegal in the bravos Dip beam. Not to go to deep into it but because the bravos dip beam uses a projector lens. It's much nicer and focuses the hid beam a lot better and doesn't blind other drivers.
swift sorted me out and guided me through the installation. But it's surprisingly easy. Most of us on here have used Hawx HID. H1 is the right bulb If I remember
they look great, here's mine
swift sorted me out and guided me through the installation. But it's surprisingly easy. Most of us on here have used Hawx HID. H1 is the right bulb If I remember
they look great, here's mine 
HID's? Yes many of us including myself. Quite an easy job. Though I'll adamantly tell you that you should not use HIDS in your fog lights, firstly the cornering function wouldn't work correctly as HID's have to warm up. Secondly and most importantly fogs use reflectors and you will scatter the bright light all over the place and dazzle other drivers. The same thing applies for people who use them as full beam lights. HIDS are ok yet technically illegal in the bravos Dip beam. Not to go to deep into it but because the bravos dip beam uses a projector lens. It's much nicer and focuses the hid beam a lot better and doesn't blind other drivers.
@swift sorted me out and guided me through the installation. But it's surprisingly easy. Most of us on here have used Hawx HID. H1 is the right bulb If I remember
Thanks for the information mate, I just completely forgot about the cornering feature on the fog lights if I was to install HIDs.
Ive seen Hawk HID on ebay:
http://www.ebay.co.uk/itm/Xenon-HID...arts_Vehicles_CarParts_SM&hash=item53e946af0c
Are these the ones you guys have installed and is it pretty much plug and play?
This post contains affiliate links which may earn a commission at no additional cost to you.
That's the one! Yep, all you have to 'modify' is the cap over the back of the headlight to get some wires through. The only problem is space!
Is anyone here selling any FIAT ABARTH Alloy Wheels?
I am after a pair of the Alloys Above, With Tyres = Ive looked on eBay, Gumtree, but cant to find any one. If not just post me if you guys have any Alloy wheels for Sale, Looking to fit them on a Fiat Bravo 2007.
Did you get a response of that dude with alloys dude
Yeah fair enough, hid kit is the biz mate, boot thing isn't for me lol.but let us know how it goes
Does anyone know if this would work:
http://www.ebay.co.uk/itm/FIAT-BRAVO-07-14-WINDOWS-MOBILE-USB-CONNECTOR-AND-12V-SOCKET-0000253512-/271568365657?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f3abc6859
On my Fiat Bravo 120 M-JET 1.9, At the moment I just have the basic Headunit like in the picture Below:
http://www.ebay.co.uk/itm/FIAT-BRAVO-07-14-WINDOWS-MOBILE-USB-CONNECTOR-AND-12V-SOCKET-0000253512-/271568365657?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f3abc6859
On my Fiat Bravo 120 M-JET 1.9, At the moment I just have the basic Headunit like in the picture Below:
This post contains affiliate links which may earn a commission at no additional cost to you.
Does anyone know if this would work:
http://www.ebay.co.uk/itm/FIAT-BRAVO-07-14-WINDOWS-MOBILE-USB-CONNECTOR-AND-12V-SOCKET-0000253512-/271568365657?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f3abc6859
On my Fiat Bravo 120 M-JET 1.9, At the moment I just have the basic Headunit like in the picture Below:
Not sure dude.pick up spares down road from me
This post contains affiliate links which may earn a commission at no additional cost to you.
What the windows usb thingy?
You want to fit the blue and me system basically? You will need more than just the port.Does anyone know if this would work:
http://www.ebay.co.uk/itm/FIAT-BRAVO-07-14-WINDOWS-MOBILE-USB-CONNECTOR-AND-12V-SOCKET-0000253512-/271568365657?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f3abc6859
On my Fiat Bravo 120 M-JET 1.9, At the moment I just have the basic Headunit like in the picture Below:
This post contains affiliate links which may earn a commission at no additional cost to you.
Yea
Yeah in my bravo I do not sure if it has windows emblem on it though
Just received my new Xenon HID Headlight Conversation Kit- H1 6000k this afternoon before installing them I would like to know if this will fail the MOT since its due in November was reading online some people mentioning that HIDs failed their MOT. ?
Just received my new Xenon HID Headlight Conversation Kit- H1 6000k this afternoon before installing them I would like to know if this will fail the MOT since its due in November was reading online some people mentioning that HIDs failed their MOT. ?
Awsome dude,I had them on both my Bravo's and neither has failed it.
Another Update:
Just purchased some Boot Springs, which will make the Fiat Bravo Boot open automatically.
Link : http://www.ebay.co.uk/itm/Automatic-Boot-Lid-Opening-Lifting-Springs-Golf-MK5-Mini-Cooper-R56-Fiesta-/251636653832?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a96b69f08
The user who is selling them provided me with some excellent advice, and also included some washers. He did mention that the struts might need to be upgraded, but for £12 including p&p seemed like a good price for springs.
The seller mentioned that it has worked on a fiat bravo 2009 but did have the upgraded struts.
Things to look out for he said:
When lifting the boot the main thing is when you start to lift it yourself how far until it's goes up on its own. If you have to lift it about 10cm from the moment it opens then no need for upgraded struts.
Just purchased some Boot Springs, which will make the Fiat Bravo Boot open automatically.
Link : http://www.ebay.co.uk/itm/Automatic-Boot-Lid-Opening-Lifting-Springs-Golf-MK5-Mini-Cooper-R56-Fiesta-/251636653832?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a96b69f08
The user who is selling them provided me with some excellent advice, and also included some washers. He did mention that the struts might need to be upgraded, but for £12 including p&p seemed like a good price for springs.
The seller mentioned that it has worked on a fiat bravo 2009 but did have the upgraded struts.
Things to look out for he said:
When lifting the boot the main thing is when you start to lift it yourself how far until it's goes up on its own. If you have to lift it about 10cm from the moment it opens then no need for upgraded struts.
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
I'm not sure pal,mine were fine,message the dude you got them from?
