Hi,With the possible onset of summer arriving I fancy getting a set of alloy wheels for my brava, but unsure of what to get. Had a look at some of the main makers but few seem to make them with a 98 pcd. Not to kean on multi fit wheels as they look as if someone has had a few goes at getting the holes right. What Fiat wheels would fit and look good? Also whats a good size to fit on ie: 15",16"? just have standard steel wheels with 175/65/14 tyres fitted.
Any help or input would be good.

madasapike said:

With the possible onset of summer arriving

Click to expand...

summer is over already, dont you remember the 2 days of sun we got in march?

madasapike said:

What Fiat wheels would fit and look good? Also whats a good size to fit on ie: 15",16"? just have standard steel wheels with 175/65/14 tyres fitted.
Any help or input would be good.

Click to expand...

any fiat alloys will fit except the grande punto.

coupe 20vT alloys are my favorite, although the stilo abarth alloys look great too.

15" and 16" both suit the bravo chassis well. 195/50/15 tyres are good, so are 205/45/16.

with wobbly bolts you can fit 4x100pcd alloys, givng you much greater choice.

Are the coupe one 4 spokes that look like an ofset cross?

the 20vt look the best and look like this

the coupe 20vt alloys fit. i have just brought some for my bravo and will be fitted by friday with refurb and painting to come ( choices, choices, choices to many colours lol).

If you get some do not get the 16v coupe wheels they look awful

Mmm not sure about them.If I'm honest don't like them at all. But each taste is different. Fancy something with a little bit more spokes.

just got 5 spoke fiat stilo alloys on mine 16 inch vey impressed with mine, but you can get what are called wobbly bolts but if like me the name wobble and bolts shouldnt go in the same sentance

20vt alloys are the best of the coop alloys but obviously Stilo Abarth alloys are the best

Hi just a quick update.
Managed to get a set of wolfrace alloys for the car.
The PCD is 100 and i'm going to use wobbly bolts and wobbly locking bolts, but need to know the torque setting for tightening them up?

treat them the same as any other wheel bolt. how tight you have them is up to you, but 90nm is the norm.