General would these fit on my sei?

[kayl0rz]

i know it says vauxhall.. but i know nothing about wheels

just figured.. its 4 stud and 14" so face value.. yes. to me anyway.

they are sexy

http://cgi.ebay.co.uk/Vauxhall-Stee...5QQihZ018QQcategoryZ28648QQrdZ1QQcmdZViewItem

 

[dave]

no offset is way out and pcd is wrong

 

[kayl0rz]

offset would look cool, and wobbley bolts

could always try them and sell them on

 

[custard]

offset would look cool, and wobbley bolts

could always try them and sell them on

thought you knew nothing of wheels but now you do?

 

[dave]

no the off set is wrong the wrong way, you would need 20mm hub centric spacers that bolt to the hub to be safe, then you might need arch work on out side

 

[kayl0rz]

arch work? why? only 6j's.

 

[custard]

well you have bid anyway.
FYI you can get these wheels right back to b/c reg such as the mk2 cavalier commander so i wouldnt pay mad money

 

[AppleSei]

They are 5.5j not 6j by the way but you shouldve posted on here first to make sure before bidding if you did bid/are winning because they will not go on.

Plus you will spend more getting all spacers, hubs etc so they may not be the bargain you first thought

 

[OxO]

i saw these and thaught the same thing and relised they wouldnt fit and it'll cost to much to get them to fit!

bear in mind there steel as well

 

[Liam]

Plus you will spend more getting all spacers, hubs etc so they may not be the bargain you first thought

+1

 

[dave]

would need pretty strange spacers, would need be fiat firt at the back have a sticky out bit at front that matches the hole in center of wheel

 

[Rampage94]

my dad owns a machine shop that does custom car work, and just looking at those wheels im thinking ££££. its going to cost a pretty penny to get the right kind of spacers then all the body work. they wont fit hun, not without alot of work.

 

[Brooky]

if you know the right people i dont recon spacers will cost alot to make,i made some 15mm ones in under a day,and i think there prity good,they did the job,ask Arc what he thinks of them,he has them now.

If you supplied me with a drawing and the material i would make some up for a beer or two.