Styling Whels?????

[nick_K]

Does any one know if uno alloys will fit on a cinq i have got some wheels that are the same stud patten and every thing else but there are two bolts in the way ( on the hub one has the guiding pin for the wheel) can i remove these??? or would this be unsafe?

any help would be appreciated

 

[rallycinq]

You can remove the guide pin and bolt opposite. The only problem is that the disc and/or drum can rotate away from the hub as you try and fit the wheels on. Once the wheels are bolted up, the disc/drum is held in place by the wheel bolts.

Cheers

D

 

[mckcrich]

Remove guide pin cut pin off using hacksaw leaving just the hex bolt head. Refit to hub - sorted!

 

[mckcrich]

Also you probably need about 10mm-15mm spacers for uno wheels (they are normally about et45

 

[nick_K]

does any one know where i can get those soft of spacers??
that would fit around the bolts?
cheers

 

[jimmy]

wish someone could tell me where to get spacers and longer wobbly bolts from

my local tune up shop is scared of wobbly bolts never mind longer than noormal ones cos they can riggle lose

the owner had problems with a cinq for his missus and wouldnt sell me longer bolts or even look. had 2 buy wheels from halfords and mod myself

resulted 2 a grinder, lots of uderseal and some dodgy arch flaring with a metal rod and a mallet

works no scraping but not pretty when u take a close look

 

[rallycinq]

Hubcentric spacers are no problem, neither are wobbly bolts if torqued up correctly.
Baa humbug

Cheers

D