Technical Tracking ?

[Jojo42]

Hi All

Anyone of you know what the correct setting is for the tracking on an 03 1.9 JTD multiwagon running on standard 16" rims is ?
Front tyres wearing on the inner edge on the drivers side and outer on the other, dealer says its right but i dont believe em... had the tracking reset by them at 9k and new tyres, now on 19k. wanted to be able to take it to a non franchised garage and have the tracking set.
I read some where tha the current thinking by Fiat was to set the front wheels parallel ? does that sound right ?

Anyway Ta very much for any info...

Jo

1.9JTD MW with nearly all the toys..

 

[cmc]

The dealer is wrong it is a design fault and has been discussed at exhaustive lenght on here see https://www.fiatforum.com/showthread.php?t=17716&highlight=tyre+wear

I've had a new axle at the cost of £650 (under warranty) to try and cure this. Still to see if it works yet!

cmc

 

[Jojo42]

Excellent.. new i'd read something about this just couldn't find where..
I'll drop a line to griptight to see if all's still oki doki with the parallel tracking..

Cheers CMC..