Technical T-Jet rear engine stabilizer mount

[Edgie70]

Hi all , has anyone fitted one of these ? Is it just a case of undo the two bolts and replace ? Mines quite buggered and bangs when changing gear especially with the air con on , thanks

 

[kik]

I have a 1.9 jtd 120 8v Bravo 2, which has two such pads on the rear of the engine. They had become soft and when ignition was heard there was a strong impact on the floor, also when driving backwards the car shook very much. I replaced them very easily with just loosening bolts and a little tweaking with a pry bar.

 

[Edgie70]

I have a 1.9 jtd 120 8v Bravo 2, which has two such pads on the rear of the engine. They had become soft and when ignition was heard there was a strong impact on the floor, also when driving backwards the car shook very much. I replaced them very easily with just loosening bolts and a little tweaking with a pry bar.

Thanks for your reply, I just hope they can get the bolt out that goes through the longest part of the mount as the exhaust is about an inch away from it .

 

[jte]

Here is youtube video how to replace it.

 

[Edgie70]

Here is youtube video how to replace it.

Thank you