General Spoiler
- Thread starter steviem18
- Start date
Currently reading:
General Spoiler
About £40 for spraying and £20 for fitting I imagine.
£20 i got mine sprayed and fitted...mates rates tho
watchyourbaK
Member
how easy is it to fit/spray it DIY? caus i was thinking of doing it that way and saving a few quid. cheers
It's really easy, just do lots of very light coats and don't forget the laquer!
There's probably a guide somewhere on here....
There's probably a guide somewhere on here....
If you want to find out how much its going to cost, just get the yellow pages and phone the bodyshop you want to do it. No point asking on here as it will only be a rough price.
Prices cary from shop to shop and area to area. If you want a decent job then you pay for it.
As for doing it yourself. It is easy but to get a decent finish takes time. You dont need to apply very fine layers. You just need to use the right kind of paint and prep the surface correctly before spraying. Getting a crap finish is easy.
Prices cary from shop to shop and area to area. If you want a decent job then you pay for it.
As for doing it yourself. It is easy but to get a decent finish takes time. You dont need to apply very fine layers. You just need to use the right kind of paint and prep the surface correctly before spraying. Getting a crap finish is easy.
dont do it with spray cans because the paint isnt strong. to do it properly you will need to use a compressor and a gravity feed gun to get a really good finish. you should get the paint from a supplier but the materials will cost more than you might be able to get it done in a bodyshop.
