General selecta calipers urgently needed

[christopher watson]

selecta calipers needed. UPDATED WITH LIST OF CALIPERS THAT FIT SELECTA.

i now need the calipers for the selecta, so i was wondering if anybody has some, and also i have been told an uno has the same part, could someone please tell me which uno, and what is the part number, many thanks

 

[christopher watson]

list of calipers that fit panda selecta 1108cc.

i have found out what cars use the same calipers as the selecta 1108 panda.

uno 60 selecta 1.1, 1989 on.
uno 60 diesel 1989, on.
uno 70ie 1.4 selecta, 1989 on.
uno turbo diesel 1.4, 1986 on.
uno diesel super 1.7, 1989 on.

punto turbo diesel 1.7, 11/93 to 6/97.
punto 75 - 90, 11/93 to 6/97.
punto 60 - 75 - 90 with ABS, 11/93 to 6/97.

lancia..
dedra 1.8ie, 1/90 on.
dedra 1.6ie with ABS, 1/90 on.
dedra turbo diesel 2.0, 1/90 to 1/93.
delta 1.6gr - hf turbo, 1/83 to 3/84.
delta 1.6gt - hf turbo, 4/84 on.
prisma 1.5 - 1.6, 1/83 on.
y10 turbo, 2/85 to 12/95.

if i find any more i will update here, hope this helps someone.

 

[dave]

Re: list of calipers that fit panda selecta 1108cc.

ive got some punto 75 ones £15 each £10.50 p+p

 

[crayon]

Whats wrong with yours?
Mine faild MOT with binding calipers and the MOT guy told me to just oil them up and see if i could un-stick them.
Worked a treat.

 

[christopher watson]

Whats wrong with yours?
Mine faild MOT with binding calipers and the MOT guy told me to just oil them up and see if i could un-stick them.
Worked a treat.

i have had the master cylinder changed, and when i tried to bleed the brakes the o/s front nipple was rusted to the caliper, so i have changed the caliper for one off a uno diesel, and the best part was it only cost £5 at a scrappy

 

[JimMagill]

i have had the master cylinder changed, and when i tried to bleed the brakes the o/s front nipple was rusted to the caliper, so i have changed the caliper for one off a uno diesel, and the best part was it only cost £5 at a scrappy

Yeah, finally some good news!

(oh and I ordered the gasket for the gearbox sump the next morning. Should be here by tomorrow)

Jim