Technical Seicento sx 899cc

Currently reading:
Technical Seicento sx 899cc

craignyc

New member
Joined
Feb 20, 2010
Messages
2
Points
1
I have a problem with this part,it seems faulty and it makes the car under perform,i have tried my best to stop it sucking air in,but it still has issues.Went to try get a new one ,they say they do not do it anymore,any ideas?

Cheers
 

Attachments

  • 20022010085.jpg
    20022010085.jpg
    615.5 KB · Views: 48
  • 20022010084.jpg
    20022010084.jpg
    510.2 KB · Views: 14
Haven't got one here, and didn't have on the old car either (both N-reg Cinquecentos)...

Can you see where either end connects to?
 

Attachments

  • P20-02-10_13.30[01].JPG
    P20-02-10_13.30[01].JPG
    1.6 MB · Views: 20
ive got one on my 1.2 it goes from the intake mani to next to the ecu. but thats on the 1.2-1.1

and on the second pic you will have one, the pip that flys off to the right from the 90 degree elbow in the middle of the pic. it wil be on there somewhere. looks like the other op has it fitted the other way around.
 
Last edited:
Is the pipe split in any way.

Cheers

SPD


Well its a V reg and the only break is where this is,if you loosen the bit,and take it off the part the car dies,so i take it its the air vacuum that has something to do with the carburator,i could always just get a new pipe and see if that works.
 
Back
Top