barbar2013
New member
- Joined
- Apr 8, 2013
- Messages
- 15
- Points
- 8
A few weeks my recently purchased seicento gears were getting hard to get in and after following the instructions given on this forum I adjusted the clutch cable by turning the nut 1 or 2 turns and the gearbox was working perfectly. Then while driving yesterday after a big snap, the clutch pedal went completely down. I thought that the clutch cable failed but while checking I noticed that the clutch cable pedal rod link ( with 2 universal joints, 9.5cm long connected to the pedal ) was broken. What I would like to ask is if this could be the result worn out pressure plate/clutch or just an accidental broken part.
Thanks
Thanks