Sei abarth alloys

Currently reading:
Sei abarth alloys

custard

Status: DEFCON Grumpy
Joined
Nov 4, 2003
Messages
48,610
Location
Edinburgh
lol TBH i cleaned my wheels up properly yesterday and there in better nick than i remebered.maybe even worth refurbing.
though i dont know if i could get replacement centres as they are a bit battered
 

custard

Status: DEFCON Grumpy
Joined
Nov 4, 2003
Messages
48,610
Location
Edinburgh
dont think there compo's.keep meaning to check for a brand when i have the wheels off
cinqi02.jpg


there slightly different in design to the normal minilite look
 

CinqyAbarth

Drives A Red Cinq Abarth
Joined
Apr 6, 2004
Messages
1,624
Location
Brighton
Hhhmmm dont suppose either of you are coming to Brooklands are you? wouldnt mind storing these for me til then? :p My gf wants a set to match mine...

Craig
 

custard

Status: DEFCON Grumpy
Joined
Nov 4, 2003
Messages
48,610
Location
Edinburgh
J333EVO said:
If you click on the 6*14 ML wheel the design looks the same as yours tho hard for me to tell from your pic, easier for you to tell.

Aaron.
ml1.jpg


nope,on mine the spokes run further into the centre without the large flat area in the centre :(
 
Joined
Mar 31, 2005
Messages
7,272
Location
Newcastle upon Tyne.
Nice wheels, i would have them, but my panda has already been fitted with those abarth alloys, and also i would rather stick knitting needles in my hand then try and drive around Glasgows one way system and the M8 :D
 
Joined
Oct 7, 2004
Messages
5,151
Location
Towcester, Northants
custard boy said:
ml1.jpg


nope,on mine the spokes run further into the centre without the large flat area in the centre :(

oh well the only others i can think of are KN Minator or genuine Minilites, tho you may find that if you measure the centre cap hole the Compomotive ones will fit, i have 2spare here and i have measured them to be 63mm across the bit that sits in hole with lip out to 66mm.

The one thing for anyone considering the Abarth wheels is that the off-set is 36mm and Fiat supplied them with spacers and a stud/nut conversion and therefore the price shoudl reflect that they do not rpivde these and therefore wouldl need the spacers at least to be bought.

Aaron.
 
Last edited:

custard

Status: DEFCON Grumpy
Joined
Nov 4, 2003
Messages
48,610
Location
Edinburgh
i'll measure them tomorrow to see.its hailstones just now so thers no way im doing it now lol :)
 
Top