Remote Window closure - Mk2 Punto sporting

[Gus_247]

Hi all, as the post suggests I am looking for some assistance. 'Scuse the long-winded first post but thought too much info is better than not enough...

I have (with the help of the forum's posts ) fitted an alarm to my Punto which currently immobilises, locks the doors and pops the boot lid from the remote. :slayer:

The question I have is this: I am using an additional module (DEI 529T) to close the windows when the alarm is activated. The colours of the wires and descriptions from the module are as follows:

Blue Motor, Side 1
Gray (-) Output through activation, Side 1
Brown Switch, Side 1
Orange (-) Activation input, Side 1
Orange/Black (-) Activation input, Side 2
Black Chassis Ground
Gray/Black (-) Output through activation, Side 2
Red (+) 12v Constant
Green Motor, Side 2
White Switch, Side 1

Colours of wires on the Fiat switch connector as follows:

Pink
Pink/White
Blk (x 2)
Red/White
Purple/Black
Purple/White
Purple/Yellow

Can anyone tell me which wires from the module connect to which wires on the Fiat loom?

I have contacted the company I bought the alarm from but they haven't been able to help me...

Got to the 'headscratching' stage now.... :bang:

Thanks all in advance.

G