Technical Rear wiper - please help the confused !

Currently reading:
Technical Rear wiper - please help the confused !

udtrev

Twin Turbo powered :-)
Joined
Jun 25, 2008
Messages
4,823
Points
905
Location
Sleepy Surrey
On fleabay you can see rear blades that look like they clip in, and the adverts claim so, but when I checked my 2007 Dynamic it looks like it has the usual type where you need to replace the whole arm.

Can you please help out this old, frozen, confused loonie :p


Trev
 
I've just had a good butchers and I do have the unclip version :D

lift the arm up and you can see where the blade can be unliped from the arm - oh goodie and cheaper and quicker to install fix :D
 
On fleabay you can see rear blades that look like they clip in, and the adverts claim so, but when I checked my 2007 Dynamic it looks like it has the usual type where you need to replace the whole arm.

Can you please help out this old, frozen, confused loonie :p


Trev

I've replaced only the rubber blade. Cheaper.
 
Does anyone have any tips please - I've ordered a Bosch blade any my wiper appears to have a slot inside of it where it clips in/out but its not coming out despite a fair bit of pressure. What is the metallic bit people are referring to please? I seem to be able to get the rubber out so guess I could just replace that.

Thanks.
 
This how I do mine:
Change-Windshield-Wipers.jpg

Slide the old one out, slide the new one in.
With the B1 I had to cut a replacement blade to size as the exact size was not available.
Not had to do the B2 yet.
 
Last edited:
This how I do mine:

Slide the old one out, slide the new one in.
With the B1 I had to cut a replacement blade to size as the exact size was not available.
Not had to do the B2 yet.

Thanks for that, you have very pretty fingernails ;)

I'll just do this then rather than risk breaking the arm I think.
 
Last edited:
Back
Top