rear washer problems

[vasker]

I have to solve a problem with the water guide
for my rear washer. How can I remove the
internal cover at the rear door of my bravo.
I already unmounted all screws I found but that
did not help. Is there a "trick" or a special screw
that is difficult to find?

 

[Smithy]

Panel

Like the front doors on my Bravo, it may just need a good tug. There are probably some white plastic studs that hold the panel in place.

 

[Martin]

There are about 6 hidden pins

you need to give it a tug or get a wide flat screwdriver and prise it off. I managed to snap one of mine when I did it so be a bit careful.

 

[Nick]

Parcel shelf supports

You've found the screws under the rubber parcel shelf supports?

 

[Mark]

Bonded by rear window cement

As well as the hidden screws my hatch panel was bonded to the rear window by excess adhesive (the black stuff that bonds the window glass to the hatch frame). Its strong stuff too - my panel cracked when I used brute force. Some WD40 helped ease it away from the adhesive.

Mark.

 

[Dave g]

Tailgate Panel removel

Vasker,
I had to remove my tailgate panel recently because my rear wiper seized up. It's held on by about 4 light grey screws and about 6 hidden white plastic pins, these need to be removed carefully to avoid breakage. There are no fixings behind the rubber bits that steady the parcel shelf. A wide bladed screwdriver or blunt chisel would be good tools to use.