Technical Punto Mk2 - Induction kit Elbow

Currently reading:
Technical Punto Mk2 - Induction kit Elbow

dolman17

New member
Joined
Aug 22, 2005
Messages
110
Points
45
Location
Lichfield
Hello

Where would i be able to get a Plastic Induction Kit elbow from, as i have a silicon one at the moment and i have been advised that it will break down after a while, and may affect my engine?

So has anybody got any ideas of where i can get it from?

Thanks very much
 
Last edited:
It is unlikely that this happens in a very short time unless you do not look after your car.

It is also unlikely that you get a plastic one.

If you need to change it get a flouro lined one.

If you can't get it then pm me.
 
You must have gotten one of those focus kits did you? I got one of them and the elbow appears to be rubber, it is matt in apperence where as silicone is normally shiney, is there any way of telling the difference between rubber/silicone.
 
I have found some elbows on SFS website?

Will these be ok to use?

Also i know i will need a 90 degree elbow but what "Bore" size will it need to be?

This is the elbow it needs to replace:

airfilter_edit4_1.JPG
 
You have to specify that it is flouro lined. The standard elbows from SFS and anyone else are siliconc without lining.

The throttle body end is 60mm diameter the other side I can't tell because I have never had one of these kits making my own.
 
sounds a bit daft m8 try the bend of a drain pipe.... thats what i use
 
This post contains affiliate links which may earn a commission at no additional cost to you.
quick q, is this a mk2? haha sorry, im such a willy..but is it?
 

Attachments

  • picture022.jpg
    picture022.jpg
    69.6 KB · Views: 50
you gonna tell them bout it? blimey...is it worth lettin em know u reckon?
 
cheers for the help, it sounds awesome!
 

Attachments

  • ikit.jpg
    ikit.jpg
    83 KB · Views: 82
Hello

Where would i be able to get a Plastic Induction Kit elbow from, as i have a silicon one at the moment and i have been advised that it will break down after a while, and may affect my engine?

So has anybody got any ideas of where i can get it from?

Thanks very much
you could try ebay or a specialist motor place for one lots of places do them
 
Back
Top