Technical Punto gt turbo

Currently reading:
Technical Punto gt turbo

slammedpunto

New member
Joined
Mar 3, 2005
Messages
2
Points
1
Hi I am new to forum and have just purchased my 1994 GT turbo off a friend. It is completely standard and just wanted to know what size wheels I could get on with a drop of 40mm without going to extreme on the mods for them to fit?

Also what mods can i do to the engine to get a few extra horses i know exhaust and air filter but what next that doesn't cost 1000s?

thanks for your help guys
 
SO if I put 16s on with a 40mm drop I won't need to make any mods even with 5 people in the car?

cheers for the site
 
Yer 16's should be ok, might touch the rear plastic arch liners.

Get a SEB chip of your car about £250 :D

Seb0 GT1 - 170hp chip - bleed valve @1.2bar, filter, exhaust
Seb0 GT2 - 170hp chip - bleed valve @1.2bar, filter, exhaust
Seb4.1 GT1 - 190+hp chip - T25, FMIC, FSE, Grale Pump, + above
Seb4.1 GT2 - 190+hp chip - T25, FMIC, FSE, Grale Pump, + above
Seb1 GT3 - 160hp chip - bleed valve @1.2bar, filter, exhaust
Seb2 GT3 - 170hp chip - bleed valve @1.2bar, filter, exhaust
Seb4.1 GT3 - 190+hp chip - T25, FMIC, FSE, Grale Pump, + above

Info on this site --> http://www.puntosports.co.uk/forums/showthread.php?t=19604

NOTE: This group buy has ended but you can still get them through Lord_Grishnack

Hope this helps
 
Back
Top